1 Hour Rated Fire Doors
*
Door and panel heights
are variable to suit
individual requirements.
*
Doors and panels have square meeting edges,
and require the normal 3mm maximum clearance demanded by the Australian Fire
Door Code AS 1905, Part 1-1990.
*
Decorative trim such as timber or plastic moulding may be specified to one or
both surfaces, and to your choice of patterns.
Maximum Available Sizes (mm)
Single Leaf: 3600 x 1500 x 48
Single Leaf: 2400 x 1118 x 38
Double Leaf: 3000 x 3000 x 48
*
Available with panel over transom to 4000mm
overall.
*
Available with panel over (no transom) in
single leaf to 3600mm overall.
Tested and Approved for use in:
*
Masonry walls.
*
Gypsum block
walls.
*
Aerated concrete blocks.
*
Steel stud walls.
*
Hardie
"Styrocon" panel walls.
*
lnsulboard panel walls.
Your choice of facings:
*
Plywood for paint
*
Selected veneer faced plywood.
*
Fire retardant grade laminate.
*
Sheet steel faces and edges.
*
Sheet aluminium.
*
'Acrovyn' RV.C.
facings.
Edge Details:
*
10mm timber concealed or exposed.
*
1mm veneer for decorative doors.
*
Steel channels or flats.
*
Aluminium anodized (available with smoke
seals).
*
Laminate (Formica) to stiles.
Hardware Options:
To our knowledge, every
lockset, surface mounted door closer and concealed closer designed for use with
fire doorsets have been tested as compatible with
Pyropanel® doorsets.
Special Hardware:
such as
*
Panic bars.
*
Card-Key hotel locks.
*
Electrically operated strikers.
*
Magnetic security locks.
*
Smoke seals for 'hot' and 'cold' smoke.
*
Kickplates
of steel, 'Acrovyn' vinyl etc.
*
Vent grilles with automatic drop shutters.
*
Security bolts.
*
Sound and dust seals.
*
Vision panels with clear or wire cast glass
*
Aluminium faced shelf to form stable door.
Frame Profiles:
of 1.1mm or 1.5mm
thickness Zincanneal steel.
*
Timber door frames to detail.
Weight (Plywood faced):
48mm - 22kg/in2
38mm - 19kg/in2
Double Leaf Doors (48mm thick only)
Meeting Edge Options
*
Standard aluminium J-section to each leaf,
in conjunction with stainless steel chain bolt or Pyropanel®
Roller Latch or concealed UDM Autobolt, to
non-active leaf, and sequence closing device.
*
Rebated aluminium clad meeting stiles.
*
Bull-nose with 'Pyroseal'
smoke seals (up to 3 hour rated).
*
Square meeting stiles (1 hour rated only).
2 Hour Rated Fire Doors
Right is a test carried out on our 2hr doors.
Maximum
Available Sizes (mm)
Single
Leaf: 3000 x 1500 x 48
Single Leaf: 2340 x 1020 x 38
Double Leaf: 3000 x 3000 x 48
* Available with panel over transom to 3600mm overall.
*
Available with panel over (no transom) in single leaf to 3600mm overall.
Tested and Approved for use in:
*
Masonry walls.
* Gypsum block walls.
* Timber stud walls.
* Steel stud walls.
*
Hardie "Styrocon" walls.
Your choice of facings:
*
Plywood for paint.
* Selected veneer faced plywood.
* Fire retardant grade laminate.
* Sheet steel faces and edges.
* Sheet aluminium.
* 'Acrovyn'
P.V.C. facings.
Edge Details:
* 10mm
timber concealed or exposed.
* 1mm
veneer for decorative doors.
* Steel channels or flats.
*
Aluminium anodized (available with smoke seals).
*
Laminate (Formica) to stiles.
Hardware Options:
To our knowledge, every
lockset, surface mounted door closer and concealed closer designed for use with
fire doorsets have been tested as compatible with
Pyropanel~ doorsets.
Special Hardware:
such as
* Panic bars.
* Card - Key hotel locks.
* Electrically operated strikers.
* Magnetic security locks.
* Smoke seals for 'hot' and 'cold' smoke.
* Kickplates of steel, 'Acrovyn'
vinyl etc.
* Vent grilles with automatic drop shutters.
* Security bolts.
* Sound and dust seals.
* Vision panels with clear or wire cast glass.
*
Aluminium faced shelf to form stable door.
Frame Profiles:
of 1.2mm or
1.5mm thickness Zincanneal steel. Composite (timber
veneered) door frames to detail.
Weight (Plywood faced):
48mm - 22kg/in2
38mm - 19kg/rn2
Usage:
Where
specified or legislated to provide 2HR protection of openings in stairways,
plant rooms, substations etc.
