1 & 2 Hour Rated Fire Doors

• Door and panel heights are variable to suit individual requirements.
  
  
• Doors and panels have square meeting edges, and require the normal 3mm maximum clearance demanded by the Australian Fire Door Code AS 1905, Part 1-1990.
• Decorative trim such as timber or plastic moulding may be specified to one or both surfaces, and to your choice of patterns.

Maximum Available Sizes (mm)

• Single Leaf: 3600 x 1500 x 48
• Single Leaf: 2400 x 1118 x 38
• Double Leaf: 3000 x 3000 x 48

• Available with panel over transom to 4000mm overall.
• Available with panel over (no transom) in single leaf to 3600mm overall.

Tested and Approved for use in:

• Masonry walls.
• Gypsum block walls.
  
• Aerated concrete blocks.
  
• Steel stud walls.
  
• Hardie "Styrocon" panel walls.
  
• lnsulboard panel walls.

• Plywood for paint
• Selected veneer faced plywoood.
• Sheet steel faces and edges.
  
• Sheet aluminium.
  
• 'Acrovyn' RV.C. facings.

Edge Details:

• 10mm timber concealed or exposed.
• 1mm veneer for decorative doors.
  
• Steel channels or flats.
  
• Aluminium anodized (available with smoke seals).
  
• Laminate (Formica) to stiles.

Hardware Options:

To our knowledge, every lockset, surface mounted door closer and concealed closer designed for use with fire doorsets have been tested as compatible with Pyropanel® doorsets.

Special Hardware: such as

• Panic bars.
  
• Card-Key hotel locks.
  

• agnetic security locks.
  
• Smoke seals for 'hot' and 'cold' smoke.
  
• Kickplates of steel, 'Acrovyn' vinyl etc.
  
• Vent grilles with automatic drop shutters.
  
• Security bolts.
  
• Sound and dust seals.
  
• Vision panels with clear or wire cast glass
  
• Aluminium faced shelf to form stable door.

Frame Profiles:

• 1.1mm or 1.5mm thickness Zincanneal steel.
• Timber door frames to detail.

Weight (Plywood faced):

• 48mm - 22kg/in2
  
• 38mm - 19kg/in2
  

Meeting Edge Options

• Standard aluminium J-section to each leaf,
  in conjunction with stainless steel chain bolt or Pyropanel® Roller Latch or concealed UDM
  
• Autobolt, to non-active leaf, and sequence closing device.
  
• Rebated aluminium clad meeting stiles.
  
• Bull-nose with 'Pyroseal' smoke seals (up to 3 hour rated).
  
• Square meeting stiles (1 hour rated only).

2 Hour Rated Fire Doors

Right is a test carried out on our 2hr doors. 

• Maximum Available Sizes (mm)
• Single Leaf: 3000 x 1500 x 48
• Single Leaf: 2340 x 1020 x 38
• Double Leaf: 3000 x 3000 x 48

Tested and Approved for use in:

• Masonry walls.
  
• Gypsum block walls.
  
• Timber stud walls.
  
• Steel stud walls.
  
• Hardie "Styrocon" walls.

Your choice of facings:

• Plywood for paint.
  
• Selected veneer faced plywood.
  
• Fire retardant grade laminate.
  
• Sheet steel faces and edges.
  
• Sheet aluminium.
  
• 'Acrovyn' P.V.C. facings.

Edge Details:

• 10mm timber concealed or exposed.
  
• 1mm veneer for decorative doors.
  
• Steel channels or flats.
  
• Aluminium anodized (available with smoke seals).
  
• Laminate (Formica) to stiles.

Hardware Options:

To our knowledge, every lockset, surface mounted door closer and concealed closer designed for use with fire doorsets have been tested as compatible with Pyropanel~ doorsets.

Special Hardware:

• Panic bars.
• Card - Key hotel locks.
• Electrically operated strikers.
• Magnetic security locks.
• Smoke seals for 'hot' and 'cold' smoke.
  
• Kickplates of steel, 'Acrovyn' vinyl etc.
  
• Vent grilles with automatic drop shutters.
  
• Security bolts.
  
• Sound and dust seals.
  
• Vision panels with clear or wire cast glass.
  
• Aluminium faced shelf to form stable door.

Frame Profiles:

• 1.2mm or 1.5mm thickness Zincanneal steel. Composite (timber veneered) door frames to detail.
• Weight (Plywood faced):
• 48mm - 22kg/in2
• 38mm - 19kg/rn2

Usage:

Where specified or legislated to provide 2HR protection of openings in stairways, plant rooms, substations etc.